mould pressure meaning in Chinese
合模压力
Examples
- Tests on mould pressure for void concrete plate
空心板梁砼模板压力试验 - 3 . based on the gel time and dsc curve figure of two kinds of modified phenolic resin and flory and kissinger theory , the rage of cure process parameters for the resin system , moulding pressure and resin content are established
3 、通过对二种改性酚醛树脂体系凝胶时间、 dsc曲线图的分析，引入flory理论、 kissinger理论，确定了树脂体系的固化工艺参数(固化温度、固化时间、后处理温度)范围；并初步确定了成型压力和树脂含量的范围。 - In order to make investigators know about the current research state of preparation of the carbon / graphite materials with high density and strength from mesocarbon microbeads , and direct the research , development and production , in this review , the influence of preparaed mesocarbon microbeads from various raw materials and methods of preparation , ball diameter of carbosphere , preoxidation temperature and time , moulding pressure and time , heat treatment temperature and heating rate , holding time on the mechanical properties and microscopic structure of carbon / graphite product were discussed by us
摘要为了对中间相炭微球制备高密高强炭石墨材料的研究现状有所了解，并且对实验和实际生产起到指导作用，本文通过参阅大量中外文献，讨论了不同原料及制备方法制得的中间相炭微球、炭微球的球径、预氧化温度及时间、成型压力及时间、热处理温度及升温速率、保温时间对炭石墨制品的力学性能及微观结构的影响。